The Path To Finding Better Tips

Timber Protection

Wood science is the study of wood as a material that is renewable and of biological origin. The processes and the tools used to utilize the material is what is known as wood technology. Wood is treated as a material in direct comparison with other products. The wood is checked against the other materials properties, performances, value, and work-ability. Wood has many advantages and this technology takes the advantages and utilizes them. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

Protection of wooden structure and products is a must if you want to keep the good looks in place. This protection is from moisture and insects which are the biggest threat to wood. The water particles in the timber increase the rotting and the insects bore through the wood. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. The protection of from this chemical is based on copper. Although being a good method to use for wood protection it has presents some few challenges. It has been seen corroding most metals for example aluminum in less than six months of its application. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. This process is highly effective and the wood properties and heightened. The time the wood products treated using this method last is longer other types of treatment.

Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.